**Please check with manufacturer on exact specifics as Centurion Service
Group is selling this system ‘as is’ and ‘where is’. Please note ALL Centurion
Terms of Sale prior to purchase. The buyer of this system is responsible for
getting it removed and shipped from its current location.**
TMS 4 MOBILE PORTABLE X-RAY X RAY XRAY 4KW NEW 1 YEAR PARTS WARRANTY
Compare to GE, Phillips and
Siemens.
TMS 4 MOBILE X-RAY 4KW controlled by a
microprocessor made of Monobloc H.F. 4 KW
stationary anode.
Fire X-ray tube 1.5 mm.
Operating mode: 2 points technique (kV and mAs).
Radiographic parameters on an alphanumeric LCD display:
40 to 110 kV -
13 to 61 mA depending on the kV value selected
From 0.2
mAs to 250 - time of 2 msec. 5 sec. depending on
the selected mAs value
Network: 115/230 V - 50/60 Hz, connected to a
standard outlet.
Beam collimator controlled manually by adjusting the
field, rotation ± 130 °.
The TMS mobile x-ray unit family covers, in the
variety of its models, all the characteristics of the radiographic examinations
at the patient bed, when he cannot reach the Radiology Department, like
Intesive Care, Plaster Room, First Aid, Paediatrics or Operating Theatre in the
post-operative phase.
The three versions differ both for mechanical
performances and for radiographic values (TMS4-4Kw / TMS300-30kW / TMS300R with
rotating arm ± 90°- 30kW), by keeping anyway an absorption of energy from the
mains, always within the limits of a standard mains plug.
This mobile x-ray unit achieves very short
exposure times and consequently it gets radiographic images non aff ected by
problems of loss of resolution due to the patient movement, even for
examinations where a very high dose level is required.
A microprocessor controls all the operations and
man ages all the parameters for a correct exposure
and for an immediate trouble shooting. Moreover, the constant linearity and the
high reproducibility assure to keep the emitted dose within minimum levels.
The APR system allows a very simple and easy use
of the unit, by the storage of the most used parameters. An homogeneous weight
distribution and a very low barycentre allow, together with a noticeable
stability, a very easy manoeuvrability.
A suitable multi-level rotating collimator,
which is provided with a lamp centered by a special tilting mirror, allows a
correct targeting before the X-ray exposure. A retractable tape meter, located
into the collimator housing, allows a fast and easy reading of the set
Focus-Film-Distance. A wide rear space gives the possibility to seat up to 4
x-ray cassettes.
The TMS 300R version, which is equipped with
rotating arm ± 90°, allows the use of the device in a very simple and easy way,
when placed side by side to the patient bed and/or incubator.
Please Note: As per the Terms of Sale - if a bid is
received within the final fifteen minutes of a timed auction, the bidding time
may be extended in increments of up to fifteen minutes. |